Electric hoist in the process of running on the I-beam is prone to the problem is the object shaking, then how to solve the problem? Dongqi Groupcrane machine will answer you below questions:
The distance of the electric hoist on the end beam should not be too far. If the distance is too far, it can’t load the fixture in the middle. Do not allow the lifting load to run near the side of the end beam. Lifting the load Shocking will touch people and things or fall, which could lead to major accidents such as death or serious injury. If the load is shaking, the more powerful the shaking, the more difficult it is to run the hoist trolley, also it will more danger. In principle, do not shake the load horizontally. Therefore, please observe the following
